Відео

Muchas Gracias

Nice But the Metal 20 mm & 40 mm Extrusions and rods are way too expensive in the UK due to VAT added to the already higher cost after the virus time all costs are 6 times or more because of the after changes in prices! Very big problem all round really! So I would have to see if I can print a different design which uses all 3D printer done parts. Just one of those things? I was thinking of designing some filament storage myself anyway since I have about 5 times more filament than you have there! And 4 printers to layout in a room for them I be building inside another bigger room so it has sound proofing and fire protection. and maybe my resin printer be used there too? I hoping to design a unit to have a HEPA filter and Carbon filter inside a box which can be unbolted to replace the filters the box has a inlet tube in the inner room and a outlet in the bigger room that small room is in. so the flumes can be sorted.

That doesn`t work

"I was spending more time fixing my 3D printer than using it to print" IRONY because I returned my Creatlity K1 and bought a Bambu X1C because of this.

I'm crazy and decided to split systems, my 3D printing drawers are using [BaBo], and everything else is using Gridfinity, luckily there's easy adaptation between the two (babo has more fin smaller elements to fit more in a smaller space)

Great Design, thank you!

I am currently filling two Alex drawers with gridfinity. thanks for the video

Theo...I'm in the process of building your filament storage system, which I'm really excited about, but I have a couple of questions. 1) What screw were you anticipating to use to attach the "WALL_MOUNT_MID" to the "WALL_HANGER"? I was expecting to use the same brass heat inserts and M5x40mm screws that are used for the "WALL_MOUNT" units but the holes are smaller than the ones on the WALL_MOUNT and the M5x40mm screws are too long. Yes, I know I can use smaller screws but I was just wanting to understand what your thoughts were when you designed the "WALL_MOUNR_MID" and how you envisioned attaching them. 2) Why doesn't the "WALL_MOUNT_MID" extend to support both rods? Do you have a model that does this? If not, would you share your "WALL_MOUNT_MID" f3d file so I can modify it? Thank you for this awesome idea, I really like that your system includes the OpenBuild V-Slot rails.

💪

this is awesome thanks for making and sharing not just files but the journey

USELESS!!!!!!

Imi place foarte mult modularitatea raftului tau. Ai de gand sa mai extinzi proiectul cu piese sau functionalitati noi pe viitor? Cum sunt de exemplu Gridfinity si Multiboard.

When you started I was afraid that you were going to make changes to the Gridfinity system. Glad to see that with "provide more value to this" you meant creating some nice designs. I love the boxes for the bags, will definitely make some of those for both the kitchen and my workshop. Ah yes: vaseline. A very versatile 'grease' that every shop needs. If you burn your fingers, cool with water as usual and then put a nice layer of vaseline on it. This will cool down even more and prevent/reduce any blisters.

If you flip those brackets it would be much stronger because in the force is being put down on the triangular bracket instead of being pulled away from it. Especially with the 3D printed part that may split at a layer line

¿Está a la venta tu diseño?

Nice one bro, thanks!

Exceptional video

do you have a materials list? the extrusion and hardware specs? Thanks

Awesome use of OpenBuilds V-Slot Linear Rail. Love this project!

I'd be curious to hear if you looked at the RepRack system and if you did, what made you choose to design an alternative.

Awesome design very practical, thanks for posting !!! Happy Extruding !

"Never build something you can easily buy online"... except when it costs 3 times as much. I priced out just the extrusion and the beam for a single row and it would be around $50 and that's not including the screws and heat set inserts. I currently use a 100% 3D printed modular rack and have used probably around 4 spools of filament to get 4 rows of spool storage (48 spools). I can easily expand horizontally or vertically for around 800g per 12 spools of storage space. With this rack it's rock solid at 4 layers and could probably do 5 or maybe even 6, but can expand horizontally basically infinitely or until you run out of wall space. I reckon I've used roughly $80 worth of filament to get essentially 4 times the storage that I would get for ~$60 using this method. There may be some limitations, but for my purposes where I'm just storing filament it has so far served me well. Actually I'm about out of space so planning on expanding again soon.

Love your storage solution, especially the strength you have built into it. I can’t wait to see the upper layers!

Tare tricoul!

Why were you using a torx bit to tighten a hex screw?

Engineers always be over engineering over complicating solutions that are not complicated at all.

Great work! Very impressed design, does the job, and well yet very simple and easy on the eyes! You’ve earned a new sub good sir!

Awesome work! Mă bucur că aduci Romania in acest domeniu. Big up!❤

Awesome design on the Bag Bins with the sliding lid. I do whish that it would have the magnet holes

Love to see how fellow makers take advantage of the limited space we all have! Subscribed!

Thanks for sharing your greate work i would need a gridsystem, where i can lock it to the grid, so i can hang it on the ceiling or under a table. any idea? actually i would hang some on the cailing of a wagon, so if it can handle vibration it would be a product whats not there yet and i believe with 3d printing its possible, maybe even a "in place print" where the moving parts are already in the print.

Awesome printer. Are the files available?

Really interesting video 👌 please keep posting + you should put klipper on the old printer just to use it to batch produce these containers 😂

Way to go man!!! Keep up the good work!!! 👍🏼😃 Nice to see you!

Nice idea bro.

Jmecherie, fam!

Metal wire looks cool but doesnt work to absorb vibrations. It just becomes moving but stiff part of construction. It lacks flexibility. I know its a bit too late since video is three years old but you can find elastic band in sewing accessories shop. I dont know how it maybe called at your end but we call it a "hat band".

Do you share your STL for the printer?

Great job, great idea.

Could you make the print available for download?

Are you able to 3D print directly from your IPad? I am looking for software.

Just talk. Can’t stand these robot voices.

I am struggling to 3d model the curveture of my dashboard what trick did you use? Have you considered security - someone can smash the window and grab the tablet?

it looks more expensive than my 60$ mic

Excellent Application 👍👍👍I want learn it , can you help me please?

Nice design, and thanks for the video.. i will try make it

hello, and for the text you have made how it is what file made with which software, I thought when could not modify the stl. merci

How can i get one for my dashboard ? I have vw atlas

How can i get one for my dashboard ?

Hmm very nice i will try it